Husqvarna Chainsaws
Models
135
New lightweight and efficient homeowner saw ideal for those looking for a chainsaw that is exceptionally easy to start and maneuver. Featuring X-Torq® engine for lower fuel consumption and reduced emission levels. Equipped with fuel pump and Auto return stop switch for easier starting
- Cylinder displacement 40.9 cm³
- Bar length (inch) 16″
- Recommended bar length, max 16 in
- Weight (excl. cutting equipment) 9.7 lbs
- X-Torq®
- Air injection
- Felling marks
- Combined choke/stop control
- Side-mounted chain tensioner
- Snap-lock cylinder cover
- LowVib®
- Inertia activated chain brake
7135 – 16” MSRP $299.99
435
Lightweight and efficient all-round saw ideal for those looking for a chainsaw that is exceptionally easy to start and maneuver. Featuring X-Torq® engine for lower fuel consumption and reduced emission levels. Equipped with fuel pump and Auto return stop switch for easier starting.
- Cylinder displacement 40.9 cm³
- Bar length (inch) 16″
- Recommended bar length, max 18 in
- Weight (excl. cutting equipment) 9.7 lbs
- X-Torq®
- Felling marks
- Three-piece crankshaft
- LowVib®
- Visible fuel level
- Snap-lock cylinder cover
- Inertia activated chain brake
- Easy to start
435 with 16” bar MSRP $329.99
445
Husqvarna 400 Series chainsaws offer the best starting performance in their class. The Husqvarna 445 has a starter cord that’s easy to pull and an engine that’s quick to start. Features LowVib® anti-vibration technology for safe, comfortable control. Powered by an X-Torq® engine for reduced fumes and fuel consumption, this superior all-around saw is ready to tackle your next project.
- Cylinder displacement 50.2 cm³
- Bar length (inch) 16″
- Recommended bar length, max 20 in
- Weight (excl. cutting equipment) 11.2 lbs
- Quick-release air filter
- LowVib®
- Smart Start®
- Felling marks
- Combined choke/stop control
- Snap-lock cylinder cover
- Three-piece crankshaft
- Inertia activated chain brake
- Visible fuel level
445 with 18” bar MSRP $399.99
545 Mark II
The second generation of Husqvarna’s 545 chainsaw is a 50cc unit that’s ready for felling, limbing and bucking of small and midsize trees. Designed for professional forestry and tree care crews, this durable saw has improved power and a slimmed-down design. A host of innovative features guarantee comfortable and efficient operation, season after season
545 Mark II with 16” bar MSRP $619.99
- Cylinder displacement 50.1 cm³
- Bar length (inch) 16″
- Recommended bar length, max 20 in
- Weight (excl. cutting equipment) 11.7 lbs
- Magnesium crankcase
- Smart Start®
- Snap-lock cylinder cover
- Visible fuel level
- Retained bar nuts
- Quick-release air filter
- Retained starter screws
- Flip up tank caps
- LowVib®
- Felling sight to last a lifetime
- Air Injection®
- Adjustable oil pump
- Easy to start
- Side-mounted chain tensioner
- Slimmed-down design
- X-Torq®
- Three-piece crankshaft
550 XP
The second generation of Husqvarna’s 550 XP® chainsaw is ready for demanding use in felling, limbing and bucking operations. The saw delivers maximum power in the 50cc class. Designed for professional forestry and tree care crews, this durable saw has improved power and a slimmed-down design. A host of innovative features guarantee comfortable and efficient operation, season after season.
550XP- with 18” bar MSRP $689.99
- Cylinder displacement 50.1 cm³
- Bar length (inch) 18″
- Recommended bar length, max 20 in
- Weight (excl. cutting equipment) 11.7 lbs
- LowVib®
- Excellent cooling capacity for a longer engine life
- Retained bar nuts
- Slimmed-down design
- Air Injection®
- Flip up tank caps
- Quick-release air filter
- Magnesium crankcase
- Retained starter screws
- Snap-lock cylinder cover
- AutoTune
- X-Torq®
- Visible fuel level
- Three-piece crankshaft
- Side-mounted chain tensioner
- Adjustable oil pump
562 xp
Husqvarna 562 XP® is developed for professional loggers, tree care workers and skilled land owners. The saw has a ground breaking design and is loaded with innovative solutions for efficient, convenient operation with large air filter and the ability to fit 28″ bars. Our unique X-Torq® engine technology provide more power where you need it, up to 20% less fuel consumption and 75% less exhaust emission
562XP with 20” bar MSRP $839.99
- Cylinder displacement 59.8 cm³
- Bar length (inch) —
- Recommended bar length, max 28 in
- Weight (excl. cutting equipment) 13.4 lbs
- Autotune
- Air Injection
- X-Torq®
- Fast acceleration
- LowVib®
- Adjustable oil pump
- Quick-release air filter
- Magnesium crankcase
- Combined choke/stop control
- Quick release air filter cover
- Snap-lock cylinder cover
- Three-piece crankshaft
- Side-mounted chain tensioner
- Slimmed-down design
- Felling marks
- Visible fuel level
- Smart Start®
- Inertia activated chain brake
- Retained bar nuts
Models
Introducing the Husqvarna X-Cut® saw chain
The X-Cut® is designed for a single purpose: to optimize the performance of your Husqvarna chainsaw. Built in Sweden to the highest industry standards, the X-Cut® will supercharge your tree and wood cutting work.
Following years of research, development and live tests, the Husqvarna X-Cut® saw chain is here. The X-Cut® is a low-vibration pixel chain that cuts a narrow kerf, while requiring less power than a standard chain. As a result, you’ll accomplish more with your chainsaw, every single day.
Sharpness that lasts
From the cutter design to the manufacturing process, every facet of the X-Cut® chain is refined to the extreme. The X-Cut® chain features outstanding sharpness straight out of the box, and it lasts longer before filing is needed.
Low stretch
The X-Cut® chain is pre-stretched at the factory, allowing you to work longer without re-tensioning. Constant adjustments won’t slow you down, and the risk of damaging the saw due to a slack chain is decreased significantly.
High durability
A precisely balanced combination of materials and manufacturing processes have resulted in the X-Cut® chain’s excellent, dynamic durability. Wear on the cutting system is reduced, along with the need for service.
High cutting efficiency
The X-Cut® chain is designed to cut faster and smoother right out of the box. Your cutting efficiency is improved, and thereby your results. At the same time, less human effort is required, which makes the experience easier on your body.
Optimal cutting angle
A saw chain’s cutting angle is critical. The tighter the angle, the higher the sharpness – however, if you overdo it, the cutter will lose sharpness and break. With the X-Cut® chain, Husqvarna has found the perfect angle.
Chrome and steel exactly measured
The microstructure of the steel – not too hard, not too soft – and the chrome layer – not too thick, not too thin – have been precisely defined on a molecular level. This ensures the X-Cut® chain’s high sharpness and cutting capacity.
Superior lubrication
Small, arrow-shaped channels in the links transport oil to the X-Cut® chain during operation, guaranteeing superior lubrication. The result is less wear and tear on your Husqvarna chainsaw.
Optimal heat treatment
For the X-Cut® chain’s hardening, Husqvarna has developed a unique method. This process involves optimal heat treatment and cooling – creating an incredibly durable structure on the molecular level.
Chainsaw Cases
Classic Chainsaw Carry Case
Husqvarna’s Classic carrying case keeps sharp chain covered and protects saw from damage during transport. Double walled for extra durability with a tab for padlock security. Fits model 136 and up to the 450 / 346XP chains saws with bars up to a 20″.
MSRP $49.99
Powerbox® Chainsaw Carrying Case
Stackable carrying case design to hold Husqvarna chain saws from model 136 up to and including the 372XP and 576XP as well as securely holding filing equipment, filing vise, scrench, spark plug, 2-Stroke oil, Bar & Chain oil and Operator’s Manual. HDPE (High Density Polyethylene) Double wall construction. “Husky leash” system for a secure fit and to protect the saw. Comes with an 18″ to 20″ scabbard. Single, fully-assembled case.
MSRP $54.99
Chainsaw Sharpener Tools
Sharp Force™ File Guide
Files both the cutter and depth gauge at one time, maintaining optimum cutting performance of the saw chain.
Available in 3/16, 5/32 and 7/32 Files sizes
MSRP $32.99
2 Stroke Fuel & Oil – Bar & Chain Oil
XP+ Premixed Fuel & Oil
Husqvarna’s high octane fuel is mixed with our best synthetic oil blend. Specifically formulated to provide the Husqvarna handheld owner with optimal equipment performance. The fuel does not degrade or oxidize like pump gas, and stays fresh for years solving longer term storage needs. 50:1 ethanol free 95 octane fuel and oil mix. Mixed with Husqvarna’s synthetic oil blend.
Available in Quarts and Gallons
XP+ 2-Stroke Oil
Husqvarna XP+ 2-Stroke Oil has been engineered to maximize your engine’s performance. Formulated with premium additives, and semi-synthetic base oils, Husqvarna XP+ has been tested and approved for use in all Husqvarna 2-Stroke engines. Husqvarna XP+ is JASO-FD certified, which ensures this formulations meets and exceeds the toughest oil standards, providing the perfect balance of engine lubricity, detergency and exhaust output. The Husqvarna XP+ low smoke formulation was also specifically engineered to ensure lowest operating temperature, preventing premature engine bearing failures. Husqvarna XP+ 2-Stroke oil formulation also contains fuel stabilizer to help reduce the risk of engine failures caused by spoiled gas. Features VEF – Verified Engine Formula. The Husqvarna XP+ 2-Stroke oil has been extensively tested in Husqvarna laboratories to ensure long term durability of Husqvarna engines.
Available in 1 Gallon, 2 Gallon, 2.5 Gallon & 5 Gallon Mix
X-Guard Bar & Chain Oil
Husqvarna X-Guard Premium Bar and Chain Oil has been designed to provide ultimate protection to cutting equipment while operating a chainsaw. Formulated from virgin base stock oils, Husqvarna’s X-Guard lubricant reduces friction and wear on cutting bars and chains, extending the life of cutting equipment. X-Guard’s reduced sling formulation includes a premium tackifier additive, which ensures the lubrication is maintained on the cutting equipment for optimal performance. Husqvarna’s X-Guard All-Season Formula provides superior cutting equipment protection while operating a chainsaw in any condition.
Available in Quarts and Gallons
Bar Chain Fit Up Chart
